Thermoplastic comparison
Polypropylene (PP) vs Polystyrene (GPPS)
Every value below is a typical room-temperature figure with its source, test method and conditions — the same dataset that drives the calculators.
| Property | Polypropylene (PP) | Polystyrene (GPPS) | Difference |
|---|---|---|---|
| Density | 0.905 g/cm³ | 1.05 g/cm³ | Polystyrene (GPPS) — 16% higher |
| Young's modulus E | 1.4 GPa | 3.2 GPa | Polystyrene (GPPS) — 2.3× higher |
| Tensile strength | 34 MPa | 46 MPa | Polystyrene (GPPS) — 35% higher |
| Glass transition Tg | -10 °C | 100 °C | Polystyrene (GPPS) — 110 °C higher |
Where these numbers come from
- Callister & Rethwisch, Materials Science and Engineering, 10th ed.
Typical room-temperature values for learning and preliminary design; grades vary widely and a supplier datasheet always overrides a textbook figure. Confirm against the datasheet before design work.