Thermoplastic comparison
Polycarbonate (PC) vs PEEK
Every value below is a typical room-temperature figure with its source, test method and conditions — the same dataset that drives the calculators.
| Property | Polycarbonate (PC) | PEEK | Difference |
|---|---|---|---|
| Density | 1.2 g/cm³ | 1.3 g/cm³ | PEEK — 8% higher |
| Young's modulus E | 2.4 GPa | 3.6 GPa | PEEK — 50% higher |
| Tensile strength | 65 MPa | 100 MPa | PEEK — 54% higher |
| Glass transition Tg | 147 °C | 143 °C | Polycarbonate (PC) — 4 °C higher |
Where these numbers come from
- Callister & Rethwisch, Materials Science and Engineering, 10th ed.
Typical room-temperature values for learning and preliminary design; grades vary widely and a supplier datasheet always overrides a textbook figure. Confirm against the datasheet before design work.