Thermoplastic comparison
PBT (polybutylene terephthalate) vs PEEK
Every value below is a typical room-temperature figure with its source, test method and conditions — the same dataset that drives the calculators.
| Property | PBT (polybutylene terephthalate) | PEEK | Difference |
|---|---|---|---|
| Density | 1.31 g/cm³ | 1.3 g/cm³ | PBT (polybutylene terephthalate) — 1% higher |
| Young's modulus E | 2.6 GPa | 3.6 GPa | PEEK — 38% higher |
| Tensile strength | 55 MPa | 100 MPa | PEEK — 82% higher |
| Glass transition Tg | 45 °C | 143 °C | PEEK — 98 °C higher |
| Melting point Tm | 225 °C | 343 °C | PEEK — 118 °C higher |
Where these numbers come from
- CAMPUS plastics database — typical grade datasheet values (campusplastics.com)
- Callister & Rethwisch, Materials Science and Engineering, 10th ed.
Typical room-temperature values for learning and preliminary design; grades vary widely and a supplier datasheet always overrides a textbook figure. Confirm against the datasheet before design work.