Thermoplastic comparison
Polystyrene (GPPS) vs UHMW-PE (ultra-high-molecular-weight polyethylene)
Every value below is a typical room-temperature figure with its source, test method and conditions — the same dataset that drives the calculators.
| Property | Polystyrene (GPPS) | UHMW-PE (ultra-high-molecular-weight polyethylene) | Difference |
|---|---|---|---|
| Density | 1.05 g/cm³ | 0.94 g/cm³ | Polystyrene (GPPS) — 12% higher |
| Young's modulus E | 3.2 GPa | 0.8 GPa | Polystyrene (GPPS) — 4.0× higher |
| Tensile strength | 46 MPa | 49 MPa | UHMW-PE (ultra-high-molecular-weight polyethylene) — 7% higher |
| Glass transition Tg | 100 °C | -120 °C | Polystyrene (GPPS) — 220 °C higher |
Where these numbers come from
- Callister & Rethwisch, Materials Science and Engineering, 10th ed.
- MakeItFrom.com materials database — typical grade values
Typical room-temperature values for learning and preliminary design; grades vary widely and a supplier datasheet always overrides a textbook figure. Confirm against the datasheet before design work.