Thermoplastic comparison
PHB (polyhydroxybutyrate, a PHA) vs Acrylic (PMMA)
Every value below is a typical room-temperature figure with its source, test method and conditions — the same dataset that drives the calculators.
| Property | PHB (polyhydroxybutyrate, a PHA) | Acrylic (PMMA) | Difference |
|---|---|---|---|
| Density | 1.25 g/cm³ | 1.19 g/cm³ | PHB (polyhydroxybutyrate, a PHA) — 5% higher |
| Young's modulus E | 3.5 GPa | 3.1 GPa | PHB (polyhydroxybutyrate, a PHA) — 13% higher |
| Tensile strength | 40 MPa | 72 MPa | Acrylic (PMMA) — 80% higher |
| Glass transition Tg | 4 °C | 105 °C | Acrylic (PMMA) — 101 °C higher |
Where these numbers come from
- Sudesh, Abe & Doi, Prog. Polym. Sci. 25 (2000) 1503–1555 — PHA structure & properties review
- Callister & Rethwisch, Materials Science and Engineering, 10th ed.
Typical room-temperature values for learning and preliminary design; grades vary widely and a supplier datasheet always overrides a textbook figure. Confirm against the datasheet before design work.