Thermoplastic comparison
PETG (glycol-modified PET) vs PTFE (Teflon)
Every value below is a typical room-temperature figure with its source, test method and conditions — the same dataset that drives the calculators.
| Property | PETG (glycol-modified PET) | PTFE (Teflon) | Difference |
|---|---|---|---|
| Density | 1.3 g/cm³ | 2.17 g/cm³ | PTFE (Teflon) — 67% higher |
| Young's modulus E | 2.2 GPa | 0.5 GPa | PETG (glycol-modified PET) — 4.4× higher |
| Tensile strength | 53 MPa | 24 MPa | PETG (glycol-modified PET) — 2.2× higher |
Where these numbers come from
- MakeItFrom.com materials database — typical grade values
- Callister & Rethwisch, Materials Science and Engineering, 10th ed.
Typical room-temperature values for learning and preliminary design; grades vary widely and a supplier datasheet always overrides a textbook figure. Confirm against the datasheet before design work.